How to resolve AdBlock issue?
×
Questions concerning iron and steel, steel making, rod rolling, galvanizing, springs, nails, fencing, and patenting go here.
Bright galvanise steel wire
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
Less
More
13 years 5 months ago #1079
by Archived Forum Admin
Bright galvanise steel wire was created by Archived Forum Admin
Hello all,
I want to draw bright steel galvanize wire( high carbon)Do you have any idea haw to do this process?
Thanks.
murat
Murat
I want to draw bright steel galvanize wire( high carbon)Do you have any idea haw to do this process?
Thanks.
murat
Murat
Please Log in to join the conversation.
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
13 years 5 months ago #1080
by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Bright galvanise steel wire
Hello Murat,
You might wish to discuss this process with your drawing machine manufacturer.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
You might wish to discuss this process with your drawing machine manufacturer.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
13 years 5 months ago #1081
by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Bright galvanise steel wire
To draw galvanized wire is common on the industry, the right lubricant and die profile help to avoid accumulation on the die causing wire breakages .
The must importan is to have a good galvanized wire with a very good addition, no grooms and good surface quality.
Not the only solution but if you try sodium lubricants and entrance die angle of 6 to 8 degrees togather with a very good galvanized wire it sould work well
Eduardo Anaya
Senior Consultant
INDEPA S.C.
Mexico City
Tel(011-52)555-407-7451
eduardo@indepa.com.mx
The must importan is to have a good galvanized wire with a very good addition, no grooms and good surface quality.
Not the only solution but if you try sodium lubricants and entrance die angle of 6 to 8 degrees togather with a very good galvanized wire it sould work well
Eduardo Anaya
Senior Consultant
INDEPA S.C.
Mexico City
Tel(011-52)555-407-7451
eduardo@indepa.com.mx
Please Log in to join the conversation.
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
13 years 5 months ago #1082
by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Bright galvanise steel wire
Thanks for your help.
murat
Murat
murat
Murat
Please Log in to join the conversation.
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
13 years 5 months ago #1083
by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Bright galvanise steel wire
Please Log in to join the conversation.
Moderators: Peter J Stewart-Hay, Eduardo Anaya, Peter M Power
Time to create page: 0.089 seconds